VGA To Svideo

5 Comments on “eForCity Premium VGA to RCA Component Cable M / M, 12 ft (3.66m) Black”

1. 
   JLRS
   July 6th, 2010 at 3:49 pm

   Review by JLRS for eForCity Premium VGA to RCA Component Cable M / M, 12 ft (3.66m) Black
   Rating:
   If you are looking for a cable to go between your PC/laptop and your LCD TV…(VGA>Component)….****this is likely not the product for you****. That is what I was looking for…but I didn’t read all the details. Most computers don’t have the ability to output a component signal. Would not work with my PC (dell) and LCD TV (vizio).

   If you’re using this cable w/ a projector…it will apparently work. Cable construction appears to be very good.

2. 
   Russ Condon
   July 6th, 2010 at 4:15 pm

   Review by Russ Condon for eForCity Premium VGA to RCA Component Cable M / M, 12 ft (3.66m) Black
   Rating:
   I purchased this VGA to RCA Component Cable M/M 12 ft because my Epson projector did not come with the ‘Component Video Adapter’. I checked the Epson website and it said the ‘adapter’ would cost me $100.00!!

   I decided to go with this cable instead because it was a small fraction of that cost. Since the projector automatically senses whether the signal coming into the VGA port is RGB or Component, this cable works FLAWLESSLY!

   I get pretty much the exact same GREAT video quality that comes through the HDMI cable using this ‘Component’ adapter. For this purpose it is simply great!

   If you need to CONVERT from Component to RGB or RGB to Component, this cable WILL NOT WORK! After all, it is simply a cable.

   If you need an ‘adapter’ for a projector like my Epson EX70 (to connect a component source such as Blu-Ray or DVD player, etc.), or another similar application, this should work well.

3. 
   D. Peters
   July 6th, 2010 at 4:47 pm

   Review by D. Peters for eForCity Premium VGA to RCA Component Cable M / M, 12 ft (3.66m) Black
   Rating:
   This is a nicely crafted, hi-quality looking cable.

   Make sure you read the description: make sure your video system can output the correct video signal. My ATI X1300 help guide tells me how to change the signal, but it cannot actually do it. so, unfortunately this cable does nothing for me yet. but I have not yet given up the fight. Perhaps I can find a 3rd party software gizmo to make this work.

   I’ll change my rating of the cable if I can actually find a way to make it work.
   

4. 
   B. Literman
   July 6th, 2010 at 5:44 pm

   Review by B. Literman for eForCity Premium VGA to RCA Component Cable M / M, 12 ft (3.66m) Black
   Rating:
   Trying to use my LG TV as a secondary monitor for my Toshiba Laptop. I could tell that the picture was there but it was hidden behind flashing, distortion, and incorrect colors. Didn’t work at all for me and will be returned promptly.

5. 
   John B. Swetland
   July 6th, 2010 at 6:03 pm

   Review by John B. Swetland for eForCity Premium VGA to RCA Component Cable M / M, 12 ft (3.66m) Black
   Rating:
   This cable works perfectly with my projector which has a Y,Yp,Yb (component) compatible VGA port. It will not work if your VGA port IS NOT (Y,Pr,Pb) compatible.

   NOTE: Your display system must support component video (Y, Pr, Pb) signal output function in order for the image to display properly. Please consult with your VGA card’s user manual for more information. NOTE: Specific TV-out feature on video card is required, please check with your video card output specification for compatibility
   

Leave a Reply